What electric skateboards can be used in the rain? Some Examples With IP Ratings!

Even though it’s tempting to ride in the rain, you need to know if your electric skateboard can handle water or not. If it can’t, you could fry your board or get stuck in a rainstorm.

Not every electric skateboard can be used in the rain.

Even though the boards say they are waterproof, it seems there is a limit.

Let me tell you a story.

I rode my Ownboard Mini KT from school to the train station when it was pouring rain. It said “water resistant” on the board, so I thought it would be fine.

I cleaned and wiped down my board when I got home. I saw that the battery life and power were no longer being shown on the digital screen.

I tried to turn it back on, but all it did was light up green. I could see that there were water droplets inside the screen’s protective shell.

The next day, when I tried to turn on my board, it wouldn’t work… Then my $450 Ownboard Mini KT broke…

My dad and I took the board apart to look at the motor and battery. When the “watertight battery compartment” was taken apart, a small amount of water leaked out.

That was the trouble… The electrical parts of the battery were broken because water got inside.

In the end, I had to buy a new battery from Ownboard’s website, which cost me about $80 and took longer to ship.

Learned my lesson.

On that rainy day, I was riding my board through puddles that splashed water all over it.

If I had gone riding when it was foggy and raining, I probably would have been fine.

If you’re not sure if you and your board are both safe to ride, it’s probably best not to take your e-board out.

Take this tip: Don’t ride your electric skateboard if the weather is bad enough that you wouldn’t ride a motorcycle or bike.

The Real Story Behind “Waterproof” Boards

Wiring and circuit boards don’t work well together with water. Most electronics are never really waterproof, though.

They are better called “water resistant” instead.

Ratings show how well something doesn’t get wet. Ratings will be given based on how well the electronics can keep water out and resist damage from water.

Again, not all ratings for water resistance are the same.

For example, getting your electric skateboard a little bit wet in a puddle is not the same as dropping it at the bottom of a 100-foot-deep lake. The lake has a lot more pressure, which will cause water to leak into even the smallest cracks in your battery and motor, which will damage them.

Let’s look at how these ratings are made.

You may have seen a number like IP65, IP56, IP52, or something else on your electric skateboard, phone, or other device.

Ingress Protection is what IP stands for.

The first number after “IP” tells you how resistant your object or product is to dust, nails, screws, and other solid foreign objects. This rating goes from 0 to 6, with 6 being the best protection against dust.

But since we’re only interested in making our boards waterproof, we’ll just look at that.

The rating against water and other liquids is shown by the second number after “IP.” The level of protection against liquids is shown in the table below.

Ratings range from 0 (no protection against liquids) to 8 (full protection) (Immersion submerged under 1m of water).

Level

Object size protected against

Effective against

0 Not protected –N/A
1 Dripping water Dripping water (vertically falling drops) shall have no harmfull effect.
2 Dripping water when tilted up to 15° Vertically dripping water shall have no harmful effect when the enclosure is tilted at an angle up to 15° from its normal position.
3 Spraying water Water falling as a spray at any angle up to 60° from the vertical shall have no harmful effect.
4 Splashing water Water splashing against the enclosure from any direction shall have no harmful effect.
5 Water jets Water projected by a nozzle (6.3mm) against enclosure from any direction shall have no harmful effects.
6 Powerful water jets Water projected in powerful jets (12.5mm nozzle) against the enclosure from any direction shall have no harmful effects.
7 Immersion up to 1m Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion).
8 Immersion beyond 1m The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects.

Since electric skateboards aren’t meant to be submerged in water, it’s unlikely that we’ll see them with a second-digit rating higher than 7. (That means there are no IP57, IP58, IP67, or IP68 ratings.)

But other ratings are possible, like IP54, IP55, IP64, and IP65.

Let’s look at how well different boards and models handle water.

What kinds of electric skateboards can get wet?

MaxFind Max 4: A water resistance level of IP65. This is one of the best ratings you can get on an e-board. It keeps the rain out and could probably handle a hose.

Enertion Raptor 2: An IP65 rating. This e-board is very fast and has a great rating for water resistance.

Jedboard AWD: IP65 rating. It’s not the most popular board, and it costs a lot of money ($1,799), but it has great water protection.

Inboard M1: A rating of IP54 for resistance to water. Protects from any kind of splashing water, such as puddles.

Blizart Huracane: An IP54 rating.

Skatebolt Tornado: An IP33 rating. A little mist is fine, but any kind of rain is probably bad for the electronics on this board.

Ownboard Mini KT: The website said that their boards were waterproof, but it didn’t say how waterproof they were. Hard to believe (especially with the story I told in the intro).

WowGo 3: Ownboard has the same problem. But the website does say that the power button and charging port should not get wet. On their website, they sell something called “waterproof glue” that can help you fix your board.

Evolve Carbon GTR: No rating. On the FAQ page of their website, it was interesting to read that “we have decided not to make waterproofing a priority in our design.”

Boosted Plus: The newer Boosted boards say they can handle water, but they don’t say how well. On their website, there was also a warning: “Any amount of water can damage the electronics on the board, and water damage is not covered by the warranty.”

Meepo V3: No rating. The site says it can handle water, but it doesn’t say how well.

OneWheel: No rating. The site says the boards can handle water, but you shouldn’t ride near any water. They also say that you should dry your board off before charging it to prevent damage that can’t be fixed.

Are boosted boards resistant to water?

“Are they waterproof?” is a question often asked about Boosted boards.

Since it’s the most popular electric skateboard on the market, a lot of people question what it can do.

The short answer is… no.

Believe it or not, Boosted’s board doesn’t have an IP rating against anything.

That doesn’t mean it doesn’t protect against dust, water, and other things that might get in its way. Boosted never decided to have it tested and rated by the government.

Some of Boosted’s boards still have seals that keep water out.

No matter what, the company says you shouldn’t ride in the rain.

The main reason is that Boosted doesn’t want riders to start riding in the rain and end up with a bunch of fried boards all at once.

Considering this, I think Boosted’s board will get an IP63 rating.

What should I do about the water damage to my board?

Uh oh.

You don’t want it to happen. Water damage has been done to your electric skateboard…

Damage from water could lead to a number of problems, such as:

  • Board not turning on
  • Board turns on but does not run
  • Digital display damages
  • Certain wheel(s) not spinning
  • Electronic failure

So what can be done about damage caused by water?

Well it depends.

I really think you should read this article we wrote about how to fix an electric skateboard. It will show you all the possible next steps you can take.

Look at the warranty.

First, find out if your board’s warranty covers it. Even though it’s unlikely that a company will cover damage you caused yourself, like water damage, it’s still worth asking.

Check out the boards website to learn about the guarantees. Don’t be afraid to call the company that made your board and ask if damage from water is covered.

Even though they’re likely to say no, you might as well ask, right?

Buy the parts you need.

Second, find out exactly what is broken. Almost always, water damage happens to the battery.

In this case, the cheapest option is probably to buy parts like a new battery and fix it yourself.

I did the same thing with my Ownboard Mini KT. Now it works like brand new.

The only problem is that you’ll need to know how to connect the board to the new battery and sync it with the remote. There should still be a video of that on YouTube somewhere.

Just type in the name of your board, “replace battery,” and “connect remote.” You should also be able to find help in the owner’s manual that came with the board.

How to protect your board from water…

I saw a guy wrap his electric skateboard in Saran wrap to make it watertight…

It’s not a bad idea, but it won’t work for long.

There are a few things you can do to make your board even more water-resistant.

First, use a waterproof sealant to fill the space where the battery meets the bottom of the board.

For the sealant, you can also use glue that keeps water out.

Another great idea is to put closed-cell neoprene foam on the underside of the battery instead of the stock foam. This neoprene foam is completely waterproof, so it will stop any water from getting into your battery.

Watch this video to learn more about how to make your board waterproof.

 

How to Change the Speed of a Lawn Mower That Moves Itself

If you have a lawn mower that moves itself, you may find that its speed is not always the best. When you’re trying to cut the grass, it might go too fast for you, or maybe it doesn’t go fast enough and you get tired quickly. Either way, it’s easy to change the speed of a lawn mower that moves itself.
You can change the speed of your self-propelled lawn mower in a number of ways. Continue reading to learn more.

Two Steps to Adjust a Lawn Mower That Moves Itself

Step 1

First, you should adjust the throttle level. Every lawn mower that moves itself has a throttle lever. Make sure the engine is completely cold.
You have to move the lever to a place called the “chock position.” Now turn it again, but this time to the fast position. Which you need to do because you’ve been using the engine recently. Start the mower the same way you started it before.
You need to pull this starter grip to do this. Make sure the key switch is set to “on.” If not, you won’t be able to start the mower. After you start the mower, you can change how fast it goes.
The throttle lever that you use to stop the car should be taken away. When you move the lever from the choke position to the fast position, the engine will feel warm enough.
Your mower is all set to cut grass. Most people like to keep the throttle at the “fast” level. It helps to turn the blade quickly so that it can cut the grass.
Some self-propelled lawn mowers have a yellow button that acts as a control lever for the blade. To move the lever forward, press the yellow button. You should put it on the handlebar.
This is very important if you want the blade to start to turn when you push the mower. On the other hand, if you let go of the lever, the rotation will stop.

Step 2

Now there is a drive clutch lever that also needs to be pushed to the handlebar. It will start moving the mower forward. You can also slowly move the lever for the drive clutch forward.
It will help you change how fast the mower goes. With this lever, you can change how fast or slow your mower goes.

Alternative

There is another way to control and change the speed of a lawn mower that moves itself. This is called a sift level. You can control how fast or slow the mower goes by moving this shift lever to the slow or fast position.
But most of the time, this sift level is set to “slow” to turn off the engine and stop the mower.
The last thing you can do to control a self-propelled lawn mower is to change its speed. There are a lot of facts that can also be used to change the speed.
If these things aren’t just right, you won’t be able to control the mower or change the speed the way you want to. So let’s talk about those things that also change how fast the mower goes.

Clogging

Most self-propelled lawn mowers have an engine that runs on gas. The fuel, which must be in liquid form, is the only thing that powers this kind of engine.
One of the most important things that slows down this type of engine is clogging. If you try to change the speed, the mower won’t do what you want it to.
When you try to make your mower go faster than the engine can handle, the engine can slow down and shut off. The main cause of this problem is clogs. So, fix the problem with the clogs and you can change the speed again.

Mixture of Fuel

Almost every gas station uses a completely different mix of fuel. They put it in the gas or fuel tanks of their lawn mowers. The fuel may be the same as octane, which is a surprise.
There are also a few special cases. There is also a mixture of gas and corn alcohol. This blend is used because it is better for the environment. Also, it costs less than other fuels. But these kinds of blends have a huge effect on engines that aren’t very big.
If you notice that your mower isn’t going as fast as it used to, you can check the fuel system. Your mower might not work well with the blend. If it doesn’t work well with your engine, you won’t be able to change the speed the way you want to.

No Motivation

Batteries, broken motion drive belts, and air stuck in the transmission system can all make it hard to change the speed. If the battery is low and you want the mower to move quickly, it won’t work.
You also need to look for any signs of damage or wear. If you fix this problem, you will be able to change the speed again.
From what we’ve talked about so far, it’s clear that changing the speed on a self-propelled machine is one of the most important skills you need to learn to do your job well and as you want.
All of the things we talked about can affect the speed. If you understand how this thing works, it will be easy to figure out how to change the speed.

See more : electricproductsreview

What Gauge Speaker Wire Do I Need

Do you want to know what gauge of speaker wire I need for my home theater system or what the best length of speaker wire is for my surround sound speakers?

There are a few things to think about before you buy that. This article will tell you everything you need to know about speaker wires, including a guide to the different types and gauges of speaker wire and what they are best used for.

12, 14, 16, 18, 20, or 22 gauge are the most common sizes. How do you know what gauge of wire to use for your speakers? The thickness of the copper conductor in a cable is the Speaker wire gauge. The number tells you how thick it is.

What Gauge Speaker Wire Do I Need? – The Complete Guide 2021

Are all the wires for speakers the same?

No, speaker wires are not all the same size or made of the same material. There are also different kinds of speaker wires for a variety of uses.

The most common type of wire is copper speaker wire with a gauges core. Copper is the most common material used to make speaker wire, but other materials can be used as well.

Here are some common materials that are used to make speaker wire:

1.Copper: This is the material that most home speaker wires are made of. It has a high conductivity rating and is resistant to corrosion, which makes it a good choice for a home audio system that will be used for a long time.

2.Silver: Silver speaker wire is very similar to copper in many ways, but it conducts electricity better. So, it can carry more current than speaker wire made from other materials with lower conductivity ratings.

Silver is also much less likely to rust and oxidize, which makes it a good choice for direct burial in the ground outside. Since it doesn’t rust easily, you don’t have to worry about the wire breaking down over time. This means you can use it for years without worrying about damage.

3.Gold: Gold speaker wire has a very high conductivity rating, which makes it great for very long runs and outdoor applications where signal loss is a concern. It doesn’t rust or corrode easily either, so it can be used outside in the open air.

4.Aluminum: This speaker wire made from aluminum is a lot like speaker wire made from copper, but it doesn’t conduct electricity as well. It can be used for most tasks that don’t require a long length of wire or an installation outside. Because of this, it is cheaper than silver and gold.

Aluminum is easy to corrode, so it’s not a good choice for outdoor direct burial because the wire could wear down over time and cause your speakers to lose sound or break.

Types of speakers wire?

1.Solid core: This speaker wire has a solid copper conductor that runs through the whole thing. These wires are less flexible than stranded wires and are stiffer.

They are great for fixed wiring and installations that won’t change. Solid core speaker wire is a better choice than stranded speaker wire for high-power receivers because it can handle the load better.

Solid core speaker wire can also lower resistance and either send out or take in electromagnetic fields. You shouldn’t use this wire to connect speakers to your main stereo or home theater system because it isn’t flexible enough.

2.Stranded: Stranded speaker wire is made of many strands of copper. It has a layer of insulation around each conductor and another layer of insulation that holds all the conductors together.

Stranded speaker wire is much more flexible than solid-core speaker wire. It is often used in car stereos because it can handle the vibrations of a moving car well.

It is also resistant to electromagnetic interference, so when you turn on your air conditioner or fan, your speakers won’t buzz.

3.Flat: There are three different colors of this flat speaker wire: white, red, and black. The white wire goes to the left channel, the red wire to the right channel, and the black wire to the chassis of your speaker.

Flat speaker wires are usually made of stranded wires that have been woven together to make them more flexible. Because it is flat, it can run along walls without getting damaged as much. When you put several speakers next to each other, it also saves space.

4.Ribbon: These flat ribbons of wire are made from different combinations of ultra-pure copper strands that are braided into a circle and bonded together under high pressure and temperature to make a solid core center.

The individual conductors are then wrapped in one more layer of insulation before the last layer of insulation is put over the whole group to hold it in place.

Ribbon speaker wire is similar to flat speaker wire in that it is also very flexible and can handle vibrations well. However, ribbon wire has a much higher number of strands than flat wire, so it has a higher resistance and less noise. It is used a lot in high-end home theaters and professional sound systems.

How thick is the typical speaker wire?

For home use, 18-gauge speaker wire is the standard size. It can be used in receivers with both low and high power. But you should be careful not to run for too long, because the thickness of the wire means that only small amounts of electricity can pass through it at once.

At 4 ohms, 18-gauge speaker wire can handle up to 10 amps of power, which is more than enough for most indoor uses. If you are using a powerful receiver or amplifier, you may want to use 16-gauge instead of 18-gauge because it can handle up to 13 amps of power at 8 ohms.

What gauge of speaker wire should be used to hook up the speakers?

Use a speaker wire that is at least as thick as the cable between your amplifier and your speakers to connect your speakers. If you want to connect your speakers to your receiver or amplifier, 12 to 16 gauge wire is a good choice.

In short, 12-gauge speaker cables can handle up to 18 amps of power at 6 ohms, which is great if you want to run multiple speaker cables in the same room.

14-gauge wire can handle up to 15 amps of power at 6 ohms, which is great for most standard home theaters with 8-ohm speakers.

At 8 ohms, 16-gauge wire can handle up to 13 amps of power, which is great for receivers or amplifiers with a lot of power.

18-gauge wire is the most common speaker wire gauge and can handle up to 10 amps of power at 4 ohms.

When you have a lot of speakers close to each other, 14-gauge wire is a good choice. If you only have one speaker and want to save money, don’t worry about getting a thicker gauge because 18-gauge speaker wire works well both indoors and outdoors.

How thick of a speaker wire do you need to hook up a subwoofer?

For installing a subwoofer, you should use a cable with the same thickness as the cable from your amplifier to your speakers. If you use 16-gauge wire between your main system and subwoofer, you should use 16-gauge wire for the subwoofer as well.

What size speaker wire do I need for a home theater?

The best gauge of wire to use for a home theater is 16-gauge. This can be used for both high-powered and low-powered receivers, but you shouldn’t run it very far because its thickness means that less current can flow through the wire at once.

At 8 ohms, 16-gauge speaker wire can handle up to 13 amps of power, which is more than enough for most indoor uses.

How thick of speaker wire do I need to connect 5 speakers?

You can put five speakers all over your house with a 12-gauge speaker wire. This size is thick enough for the length of your connections and can handle enough wattage.

For car audio, what kind of wire is used?

A thinner conductor is used for car audio because it is more flexible and won’t make the car heavier. This makes it easy to put the speakers in the factory or aftermarket locations without damaging the other parts.

When adding an amplifier, you should usually use 16-gauge wire, and if your speakers are powered directly by the factory head unit, you should use 12-gauge wire.

Can I use speaker wire to connect a subwoofer?

Yes. You can use speaker wire to connect a subwoofer as long as it is at least as thick as the cable that goes from the amplifier to the speakers. If you use 16-gauge wire to connect your main system to your sub, you should also use 16-gauge wire for your sub.

What is the best wire to use to hook up speakers?

14-gauge wire is the best to use for speakers. At eight ohms, this can handle up to ten amps of power, which is great for most indoor uses.

How thick of a wire do I need to link two speakers?

If you want to connect two speakers in parallel, you should use 16-gauge wire. If you use 14-gauge wire, the sound might not be loud enough to hear well.

How thick of a wire do I need for a 1000-watt amplifier?

14-gauge wire should be used for a 1000-watt amplifier. This is thick enough for the length of your connections and can handle enough wattage.

With a 100-watt amplifier, what gauge of speaker wire should I use?

You should use a 12-gauge wire for a 100-watt amplifier. This is thick enough for the length of your connections and can handle the power from a smaller amplifier.

How thick of a wire do I need for a 15-watt amp?

Use 16-gauge speaker wire for an amplifier that puts out 15 watts. This will be strong enough to handle the power of your amplifier while still being thick enough that you can move it around without too much trouble.

If the speaker wire is too thin, what happens?

If your speaker wire is too thin, it might not be able to carry the power your system needs. This could damage your system’s parts. If the wiring is close to other cables or electrical sources, it can also make noises and hums.

Does it matter how long the speaker wire is?

Yes, it does matter how long your speaker wires are. The longer it is, the more resistance there will be. This means that less signal gets to where it needs to go because the power has to travel through more wire.

Can speaker wire change the bass?

Yes, the bass can be changed by the speaker wire. If your wires are too thin, they won’t be able to carry as much power to the speaker. This means that your bass response won’t be as good.

Does the thickness of the wire affect the sound?

Yes, a thicker wire can change the amount of power that gets to the speakers. The sound quality of your system will be better if the wire is thicker.

For a 5.1 surround sound system, what gauge wire do I need?

You should use a 16-gauge speaker cable for a 5.1 surround sound system. This can be used for both high-powered and low-powered receivers, but you shouldn’t run it very far because its thickness means that less current can flow through the wire at once.

Similar Questions Often Asked

For a 600-watt amp, what size wire do I need?

18-gauge is the best size for a 600-watt amplifier. This can handle the power of an amp and is thick enough that you can easily move it from place to place without making it harder to move.

How much power should speaker wire have per foot?

About two watts per foot should be enough for your speaker wire. If it has more than this, it might add too much resistance to your line, which could cause your signal to be lost or your parts to break.

For a 25-watt amp, what size wire do I need?

If your amplifier is 25 watts, you should use speaker wire with a gauge of 18. This can easily carry the power from your amp without being too thick to be used in most home audio situations.

For a 50-watt amp, what size wire do I need?

You should use 16-gauge wire for a 50-watt amplifier. This is thick enough to handle the length of your connections and can handle the power needed for most audio uses.

For a 250-watt amp, what size wire do I need?

16-gauge wire would work best for a 250-watt amplifier. This can easily carry all that power, and it’s still thick enough that it won’t slow down your connection too much.

Conclusion

As you can see, speaker wire gauge is very important, and you should choose the right one for your speaker. When we talk about length, it’s also important to remember that whether you install a subwoofer, 5 speakers, or a car audio system, it’s all up to you.

Lastly, please keep in mind that the gauge of speaker wire you choose will affect how far you can run the wires.

 

Is Asus A Good Laptop Brand, Why Do We Recommend These Asus Laptops?

Asus is a well-known brand in the tech industry, with a long history of innovation and leadership. Tablets, desktop computers, personal digital assistants, monitors, motherboards, smartphones, sound cards, and a slew of other devices are all in the crosshairs of the company’s innovation. Is Asus, on the other hand, a good laptop brand?

It’s one of the most frequently asked questions. Let’s see if it’s true that Asus is a leading laptop brand and what makes it so popular.

All of Asus’ laptops

Let me first tell you a little about the bread before you decide to go with the Asus laptop. The more you learn about it, the more confident you’ll feel about making a purchase.

Asus is a Taiwanese multinational company that specializes in computer hardware and electronic products for the personal computer market. Since its inception, Asus has continued to improve its laptops’ high-end and robust features, which have piqued the interest of consumers everywhere. Even if you have a relatively low budget, Asus laptops are known for their elegance and supreme quality.

Asus Laptops Has a Bright Future.

To be completely honest, whether or not you decide to go with Asus is entirely up to you. In contrast to slanted guides and reviews, we present you with the facts and general observations that many customers have made about this brand in this article…..

Design

To begin with, Asus laptops are visually appealing. In terms of design and overall construction, this is a very impressive piece of man-made art. Everything from a polished and sober look to a chic and sophisticated demeanor is covered.

Customers will be delighted by the beautiful design and attention to detail, as well as the friendly manufacturing process.

Performance of a high standard

Secondly, thanks to the QoS and the attention to detail in each internal component, even the most ardent PC users can expect long-lasting performance and durability. Of course, Asus does not hold a monopoly on this market, but the best part is that it successfully competes with other brands that claim to be No.1!

a solid outcome

Asus hardware delivers outstanding performance even when subjected to heavy workloads. Additionally, the Asus laptop’s thermal cooling system welcomes many intensive gamers to experience reliable performance without lagging or random freezing..

In addition to the powerful output, the 97 percent screen to body, and the narrow bezel-engineered style, users can keep their work uninterrupted.

As a small and portable piece of equipment, these are undoubtedly the most important features. In terms of graphics, processing, and RAM, the Asus laptop is on par with a desktop computer.

Budget

There’s no doubt that Asus laptops have a high level of sophistication, as you’ve seen above. That doesn’t mean, however, that you’ll go broke! Asus offers a wide range of budget-friendly options to its customers, starting at $200 and going up from there.

The Asus Zenbook line is designed with students and university students in mind, as well as those on a tight budget. Definitely, the price tag is the first thing that many people pay attention to. Asus laptops never let you down when it comes to quality, and they’re still in the affordable range, making them a standard piece of equipment.

Isn’t it sufficient to merely mention how great this brand is?
Defying Limitations

When you buy an Asus laptop, you’re getting a piece of the future in the form of smart technology, sensors, and other cutting-edge features. Laptops from the Asus brand feature cutting-edge technology that other manufacturers view as a danger. This brand stands out from the rest because you get desktop-grade performance and quality in a laptop.

Support from a tech team

Asus’s tech support is another reason why so many people love their laptops. Asus’ phone and call guidance keeps the customer happy. As long as you’re using the online service, you can get help at the click of a button. According to Asus’ website and social media presence, their laptops are extremely useful, so there’s no need to second guess yourself if you already own one.

Warranty

This company offers its customers a more comprehensive warranty and replacement program even after quality assurance measures such as third-party testing, verification, and certification have been taken. Even if your laptop is damaged beyond repair, the manufacturer’s 1-year limited warranty will still cover you.

Is there anything negative to say about the Asus laptops?

You should keep looking for the truth if someone is claiming that a product is perfect. The battery life on an Asus laptop isn’t great, but that’s to be expected with any laptop.

So, do I need to buy an Asus computer?

Still undecided about whether or not to purchase an Asus laptop? Keep in mind your own personal requirements and needs before making any final decisions. Based on the information presented above, it’s possible to make some educated guesses about the working style.

We’ve talked about the key elements that contribute to a higher level of overall performance quality. If you narrow down your options, you’ll find it much easier to make a decision in our recommendations.

Don’t buy a high-end or luxurious laptop if you don’t really need all of its features.

The End of the Road

Over the years, Asus has emerged as the most popular brand name in the industry. There is a wide range of future possibilities available to you at a reasonable price. Asus laptops are used by a wide range of people, from office workers to gamers. This brand’s performance, attitude, and offers make it difficult to compete with them in the first place.

The choice is entirely yours, however, and can be as specific as you wish. You get what you pay for at the end of the day!

 

Which Solo Microwave Is Best?

Which Solo Microwave Is Best, things you need to know.

Is the Solo microwave up to par?

In comparison to other microwave types such as grill and convection, solo microwave ovens are less expensive. The price of a single microwave oven ranges from 4,000 to 8,000 rupees. However, a single microwave oven cannot be used for grilling or baking. They’re suitable for basic microwave-only tasks, as well as easy cooking and reheating.

Which microwave brand is the best?

Picks for the Best Microwave: Overall winner: Panasonic Countertop Microwave Oven (Family Size). Amazon Basics Microwave is the best microwave for dorm rooms. GE Microwave Oven: Best Over-the-Range Microwave Microwave Oven with Over-the-Range Sensor.

What is the most dependable microwave brand?

GE Capacity Smart Countertop Microwave Oven with Scan-To-Cook Technology is the best compact microwave oven.

Breville, LG, Signature Kitchen Suite, Maytag, Hamilton Beach, and Insignia microwaves stand out as the most dependable manufacturers, earning an Excellent grade from all six. Five of the other 32 brands we surveyed received a Very Good grade. What microwave is the finest in 2021?

Hotpoint Curve MWH 1311 is the best microwave in 2021. Sage Quick Touch Crisp Panasonic NN-DF386BBPQ Fusion AMW 848/IXL by Whirlpool. SM22090 Swan SM22090 Swan SM22090 Swan SM2 The best microwave for less than £100. RHFM2363B Russell Hobbs Ideal for a modern style. HMT75M451B is a Bosch product. The best microwave for tiny spaces. Microwave/convection oven Beko 32L. Microwave oven with the best combo.

Is it possible to prepare pizza in a single microwave?

It’s fantastic for cooking, but it won’t let you grill or bake with it. A single microwave oven is adequate for basic microwave requirements, but it lacks additional features. In a single microwave, only glass or plastic may be used. Is it possible to cook chicken in a single microwave?

In a single microwave oven, we cannot bake or grill meals. In the microwave oven category, solo microwave ovens are the most basic or entry level devices. Microwaves are produced by a single magnetron. They’re great for bachelors or a two-person household.

How do I choose the best microwave for my needs?

Wattage means power when it comes to microwaves. A 1,000-watt microwave cooks rapidly and effectively, so that’s a good starting point. Microwaves with fewer than 700 watts cook more slowly and unevenly. In general, the greater the wattage, the less time it takes to cook.

What is the greatest microwave to purchase on a budget?

In 2021, the Best Affordable Countertop Microwaves Magic Chef Countertop Microwave, 1.1 Cubic-Foot GE Galanz ExpressWave 1.1 Cubic-Foot Mid-Size Cubic-Foot Cubic-Foot Cubic-Foot Cub EM031M2ZC-X1 by Hamilton Beach. Smart Sensor Toshiba EM131A5C. EM925A5A is a Toshiba model. Stainless Steel Front Magic Chef MCM990ST 900W Countertop Oven Digital Black+Decker EM925AB9.

When it comes to microwaves, how long should they last?

With typical usage, the average microwave oven lasts around seven years, and with excessive use and bad maintenance, it lasts much less. As a big family becomes increasingly dependent on the device to heat up snacks and leftovers, or to thaw meals, it may need to be replaced every four to five years. Which microwave brand lasts the longest?

In our studies, smaller models are underpowered and do not perform as well as bigger units. Breville, LG, Signature Kitchen Suite, Maytag, Hamilton Beach, and Insignia were among the six manufacturers that received an Excellent grade.

Related:

What are the telltale symptoms that a microwave is about to fail?

Here are several warning signals that it’s time to look for a new microwave. There was smoke, sparks, and a burning odor. These are warning indicators of a major and pressing issue. The food isn’t adequately cooked. As it cooks, it makes obnoxious noises. The door isn’t adequately sealed. The keypad isn’t working. It’s more than a decade old.

What is the greatest microwave for baking and grilling?

For individuals looking for a high-quality microwave oven for grilling, baking, frying, roasting, defrosting, reheating, and other types of cooking, convection microwave ovens are the ideal option. These are the most sophisticated microwave ovens as compared to single microwave ovens, which means they are also the most costly. Is it worthwhile to invest in a combo microwave?

Combination microwaves allow you to crisp food while heating it in the microwave, although they’re a little more costly. Cobb describes them as “very handy items of gear.” “They’re perfect for all veggies,” says the author. Dare I say, after you’ve used one, you’ll be converted.

Please see more information here!

How To Teach Yourself Guitar (Best Ways Today)

When you sign up for in-person guitar classes, you get the benefit of studying from a professional musician. These lessons, though, can be costly. You must adhere to a strict schedule, and you may not have access to lecturers with extensive experience in your field.

If you’re looking for a different way to learn guitar, you should know that there are numerous online tools available. It’s critical to choose a strategy that is tailored to your needs among online classes, videos, and apps. Here are some of the most effective methods for learning to play by yourself.

Best Free Alternative: YouTube

If you search for “how to teach oneself guitar” on YouTube, you’ll find a plethora of videos with expert guidance from guitar players.

YouTube is a fantastic resource for anyone interested in learning to play the guitar or any other instrument. You may discover videos on just about anything, from guitar tuning to modal progressions. The nicest part about YouTube is that you can watch all of this video for free if you are willing to wait through a few advertisements (or skip ads entirely with a YouTube Red subscription).

Here are some of our favorite beginner-friendly YouTube channels:

Marty is a musician who creates music. Marty Music is a well-known guitar-learning channel. There’s a playlist with beginner acoustic and electric guitar lessons that cover all the fundamentals. If you’re looking for song instructions or gear advice, this channel is a gold mine.

Andy plays the guitar. This YouTube channel provides some free content in exchange for promoting a paid online service. Andy Guitar, on the other hand, offers a fantastic ten-day course that will help you get started playing guitar before you invest in online lessons.

GuitarLessons. We enjoy GuitarLessons since the majority of the videos it uploads are short and easy to understand for beginners. This channel includes information on how to play chords, strumming patterns, exercises, practice routines, typical mistakes to avoid, and step-by-step lessons.

GuitarZero2Hero. This channel is one of the best places to find guitar tutorials on the internet. On a weekly basis, new instructions are added, including tutorials for recent hits. There are also a few lessons for beginners that cover the fundamentals of music, such as chords.

These are merely the tip of the iceberg when it comes to available channels. You may look up any guitar-related topic or a guitar tutorial for your favorite song on YouTube, and you’ll almost certainly find good videos. YouTube has the disadvantage of not providing the same structured approach as online lessons, but it’s a terrific option for self-directed learning.

Pros:

YouTube is a never-ending source of free content.

Tutorials for the songs you want to learn are easy to come by.

There are numerous channels with excellent lectures for ideas that novices must master.

Cons: Not all of the videos you’ll see are of high quality.

Some channels provide free programming in order to advertise commercial services.

Learning is not structured in the same way that it is with online platforms.

 

Chordify is the best app for learning guitar.

Chordify isn’t a complete method for learning to play the guitar, but it is a must-have tool that offers you access to a massive library of song chords.

This app has around 22 million songs in its library. You can find chords for any song by searching online.

The concept is similar to that of karaoke. You’ll see the chords for different parts of a song instead of the lyrics. You can view the chord progression as you play along, or if you’re a beginner, you may utilize the capo option to simplify the chords.

The software includes features such as playing chords on repeat or slowing down the sequence to assist you in learning a new song. Any of the songs can be printed in PDF format. A useful personal library option allows you to bookmark your favorite tracks and receive customized recommendations for what you should study next.

Chordify isn’t going to teach you how to play chords, but it is one of the greatest places to go for accurate guitar chords for any song you wish to play. On Android, iOS, and the desktop, Chordify is available.

Pros:

Chords for approximately 22 million songs are available.

Mobile app that is easy to use

To learn new tunes on guitar, loop or slow down chords.

With the personal library option, you can keep track of your chords.

Cons: Chordify does not provide instruction on how to play chords.

You are unable to listen to the songs.

Guitar For Dummies is the best book for beginners. Jon Chappell and Mark Philips

Guitar for Dummies is a lighthearted introduction to the instrument. The book has about 400 pages of content and covers topics such as how to choose your first guitar, how to play fundamental chords, and how to begin playing melodies.

One of the benefits of this guitar book is that you can study it even if you don’t have internet access. If you wish to read this content on your phone, tablet, or eReader, you can choose between the paperback and Kindle versions. In any case, it’s a terrific method to learn basic guitar ideas on the road.

This For Dummies book appeals to us since it goes beyond the basics. You’ll be able to explore numerous genres and locate several chapters that introduce music theory once you’ve mastered all of the fundamental basics.

Unlike previous editions of the book, which included a DVD, this updated edition includes internet videos and audio samples. These extras add to the book’s value by allowing you to listen to samples and see teachers show strumming patterns.

There are certain disadvantages to learning guitar from a book because text, graphics, and diagrams can’t replace videos, but this book offers an unusual blend of forms by providing access to video and audio clips.

Pros:

On the fly, learn about crucial subjects.

Learn fundamental ideas before moving on to more advanced ones.

Video and audio snippets are available.

Quite a thorough resource

Cons:

Some subjects are difficult to grasp without the assistance of extra video resources.

To utilize the audio and video clips, you must have access to the internet.

Finishing Thoughts

How you teach yourself guitar is determined by the results you desire and the amount of time you are willing to devote to this endeavor. If you’re willing to devote a few hours per week to studying, we recommend Guitar Tricks.

When you sign up for in-person guitar classes, you get the benefit of studying from a professional musician. These lessons, though, can be costly. You must adhere to a strict schedule, and you may not have access to lecturers with extensive experience in your field.

 

How to Build A Soundproof Booth?

It can be hard for musicians and sound recorders to find space to rent out your own recording studio. There may not be enough money for the rent each month, and even if there is, it could hurt your finances in the long run. Make your own sound-proof booth at home.

For many people, this is the easier and more convenient way to go. Also, you can work from the comfort of your own house with this.

Building a soundproof booth at home may surprise you. It doesn’t take a lot of time, money or even space. If you don’t have a lot of space, you can still make a small sound-proof booth for yourself.

All you need to do is make sure that the sound insulation is done right, so less noise comes into and goes out of the room. With a soundproof booth, you’ll also be able to get rid of echoes, which will make the sound better.

Building a soundproof booth may be something you want to know how to do next. In the guide below, I show you how to build a sound-proof booth in your home.

What you’ll need to do

As long as you have the money, you can build a soundproof booth at home instead of renting a recording studio. However, you will still need some materials and tools to make it happen.

To build a completely sound-proof booth, you’ll need these:

It’s a door.

A machine that drills

One of the tools that is used to tighten screws

A sealant is used to keep things from getting wet.

It looks like there are sheets of plasterboard on the ground.

It’s made of wood.

It’s time to get to work.

Find a Good Place

Choose an area of your home that is rarely used or only used by you to avoid any problems. It also has to be big enough that you can move around and don’t feel like you’re working in a small space.

As far as where to put a home soundproof booth goes, people usually put them in the basement, garage or loft.

If you have a lot of space, make a plan and figure out how big your booth should be.

Paint the Walls.

When you buy a door for your house, it’s likely that it’s hollow inside. There is a way to find out if the door to the room you want is hollow: You can knock on it.

If it’s hard and solid, like your front door, then you have a door that is strong. Then, if it feels like cardboard, it’s most likely hollow inside. The door and the walls of your home soundproof booth are two of the most important parts. You’ll want to pay extra attention to these two things.

For the walls, I think you should get a sound-absorbing blanket to make the room more quiet. It’s a good idea to buy this noise-blocking blanket from Amazon.

Fix the door, then.

There are now wall frames in place. Let’s move on to the doors now. Ready-made doors are easy to find, and when you’re looking for a door for your booth, it’s best to go with a solid door. They can be a little pricey, but they work well when it comes to soundproofing.

But if you don’t have a lot of money, a normal hollow door will work just as well. To make it soundproof, you can use a soundproof blanket or a door draft stopper to make it more dense.

If you want to make a soundproof booth, make sure that the pins and knobs are well screwed together.

Add the Soundproofing Material to your home.

When it comes to soundproofing your booth, there are a lot of things you can choose from.

However, I’m going to focus on drywall and acoustic foam, which are the two most popular ways to cover your walls.

Drywall is a panel made of calcium sulfate dihydrate that is pressed between two pieces of wood. It’s very good at blocking out noise and can be bought easily from hardware stores.

If you choose to use drywall, you will need to attach it to both the outside frame and the inside of the booth, as well. You’ll need to make sure it’s well attached and there are no gaps. I’d also recommend screwing it in for extra safety.

While you may need some help to put up the drywall, it’s worth the time and money.

However, you can also use acoustic foam panels that are made of soundproof materials to keep noise out of your booth.

There are acoustic foam panels that were made for recording studios and booths. They will work great in your soundproof booth at home.

These acoustic foam panels come in all shapes and sizes, and it’s hard to decide which one to use.

It’s important to keep in mind that because acoustic panels come in so many different types, they each have different abilities and structures. Check out acoustic panels and see what you can get for your money.

Because of this, acoustic panels may be better for your booth than drywall. You can set the panels in different ways. Isn’t that great? You can even pick different colors and designs!

As with the drywall, you’ll need to make sure that the panels are well-placed and secure, just like with the drywall.

Drill a few holes, then.

If you want to record in your booth, you’ll need to drill some holes in the frame. This means that you will be able to run the signal cables through these holes, as well as any other cables that you need.

Fix All The Gaps

Small gaps and holes can make it hard for sound to get through.

Check the booth to make sure there are no holes or gaps. Silicone caulk can be used to do this, and you can do it this way.

Install Weatherstripping to protect your home.

Weatherstripping is a great way to keep noise out of doors. A door may still let some air and sound into the booth even after all the gaps are closed.

Putting weatherstripping on the door solves this problem. If there are any gaps in the weatherstripping around the door frame, you can still use silicone caulk to fill them in.

How Does Soundproofing Work?

Noise pollution is becoming more and more common for people who live in cities. This could be noise from traffic, noisy neighbors, music, TVs in other rooms of your home, or other electrical goods.

A certain level of noise pollution is acceptable to most people, but if the noise starts to bother you in your daily life, you may wonder how to block it out.

If you want to keep noise from coming into your room or keep it from leaving your room, you usually do soundproofing. Though it’s not possible to completely block out the sound, it is possible to drastically cut the sound levels.

What makes a sound?

First, you need to know what sound is. Then, you can understand how soundproofing works better. Sounds are made when an invisible wave moves through something that is liquid, gaseous, or solid. Noise is made when sound tries to move through a solid. There are two types of sounds to be aware of.

This includes sound that travels through the air and sound that is made when something hits. It’s not hard to tell these two types of sounds apart. Airborne sound is anything that moves through the air, like voices and music. It makes a noise when two solid objects touch. This noise is called impact sound.

There are a lot of different ways to make your home quieter.

Even though we’ve talked about this term before, we’ve looked into it a little more. Soundproofing is a way to cut down on or get rid of noise that you don’t want in your home, office, or general area.

When this noise first starts, it may not be very noticeable. Over time, you may start to find that it is more annoying. While some people might let it go on in the hope that it will stop one day, soundproofing your home is the best way to get rid of it.

How does soundproofing work? This is a question that many people ask.

This is how soundproofing works. Let’s look at it now. How you soundproof your home will depend on what kind of noise you want to get rid of. Airborne is the most common type, and it can be a problem in homes that have thin walls inside.

Because they aren’t very strong, they can break and aren’t very well insulated. People who live in their homes will find it easier for the sound to move between different rooms.

Cracks in your walls are usually the main source of this sound. You’ll also need to fix any holes in your doors, ceilings, or floor boards. Then, you can add a layer of insulation to stop the noise from going far.

If a wall doesn’t have a lot of space, noise from one room can travel to another. Vibrations from one room can travel because there are no connections to stop them. This means that noise that is made in one room can be heard in another. The answer is to make a series of small gaps. They will mess with the vibrations. In the next step, add insulation. In this way, you will make sure that any more vibrations are absorbed.

The part of the room that should be sound-proofed is the one that is in the middle.

A lot of the time, sound can travel in and out of a room through the walls. It can also travel through the roof, but this is rare. You will need to work on soundproofing these things and surfaces, so this is where you’ll have to spend your time.

When you walk around your home and listen for noise, you can figure out which rooms need to be soundproofed and which ones don’t. Listen very carefully to see where the sound is coming in and going out of the room. You can either stand or walk around the room.

For this reason, you should soundproof your home:

If you make the noise, soundproofing your home will make sure that it doesn’t bother your neighbors who live near you.

In some cases, too much noise can make it hard to get a good night’s sleep and cause other problems. People who live in your neighborhood will be happier if you cut down on the noise.

People who live next door may be making the noise. For example, they may be having work done on their house, or they may be playing music at a high volume all day. Soundproofing your home will make the noise less intense.

Materials that can be used to keep noise out of your home:

There are many things you can do to make your home less noisy. When you are trying to reduce noise that comes from the air, you need to make sure that the material you use is the right weight. The following materials are good at blocking out noise. Polymer membrane, plasterboard, vinyl, MDF fiberboard, and mineral wool are all in this group.

Materials that are used to deal with impact noise are usually soft and more effective at absorbing noise. Some of them are chip foam, wood fiber, closed-cell polyethylene foam, polyurethane foam, and other things, too.

If you want to reduce both airborne and impact noise, you will need a mix of materials. Even if your home doesn’t have a lot of noise, there are noise-cancelling systems that you could put in a room. In the end, they will work by canceling out the sound waves, making the noise much less noticeable. They have a microphone on them.

In general, this option isn’t the best because it costs a lot of money. These people will likely benefit from adding insulation and filling in any holes in walls or doors, for example, so that they can save money.

Final Thoughts

When you soundproof your home, you reduce and dampen the amount of noise that comes into your house. Sound comes in two different forms. The way you soundproof your home will depend on the type of noise that you are trying to get rid of.

Does Skateboarding Help With Snowboarding?

Does Skateboarding Help With Snowboarding?

The first time I went snowboarding, I can still remember it clearly.

The fact that I had been skateboarding for a while helped me tremendously.

If you’re planning a snowboarding trip, you have an advantage if you can skateboard.

It’s possible to learn snowboarding without taking a class thanks to skateboarding.

It’s more harder to learn to ride a snowboard, but it’s much easier to learn the tricks.

There are a few things in common between skateboarding and snowboarding, but the greatest difference is that you are pushing your snowboard against snow instead of pavement.

Some things are more difficult than others in terms of carving, performing feats, or riding.

 

What Do Skateboarding and Snowboarding Have in Common

Skateboarding has incorporated several skateboarding stunts.

If you’ve ever skateboarded, you’ll have an easier time learning these moves on a snowboard.

What else comes to mind is how you ride both a longboard and a skateboard sideways.

Skateboarders and snowboarders both suffer from discomfort, such as aching feet or a sore back after cashing checks.

Posture and Stance

My mind immediately goes to stance, both goofy and ordinary.

Board feel is another term for this quality.

A snowboard is easier to learn to ride if you’ve previously ridden a skateboard.

When it comes to steering, there are a few things that are similar.

However, making a turn is quite a little more complicated.

Both sports necessitate a slight bend in the knees to keep one’s balance.

Tricks and Objects

You can see the similarities between skate parks and snowboard parks by looking at them.

Big jumps, rails, and half pipes should be common knowledge among skateboarders.

You’ll have a blast in a park once you’ve mastered the fundamentals of snowboarding.

Jumps will be a breeze for you.

Boardslides and 50-50s.

You’ll advance at a far faster rate than those who have never skateboarded.

Difference Between Snowboarding and Skateboarding?

There is a major contrast between skateboarding and snowboarding because you’re riding snow rather than pavement.

As a result, you won’t have to exert yourself as much as before.

In addition, the straps that hold your feet to your board make it impossible to get off.

You’ll have to get used to this, so I recommend taking it easy to prevent injury.

Snowboarding, like skateboarding, necessitates practice and an ability to maintain one’s balance at all times.

Another consideration is the object’s size.

When it comes to skateboarding, size doesn’t matter as much as it does in snowboarding.

If you want to ride snow and stay afloat, you’ll need a bigger board.

If you plan on doing park tricks and freestyling, you’ll need a smaller board.

Snow isn’t as painful as concrete, but ice is a another story.

Slowing Down

You can’t just put your foot down when it comes to slowing down.

Powersliding is accomplished by pressing the edge into the snow and leaning slightly backward.

In addition, the distance between your feet is broader than normal, which can be a little awkward at first.

For snowboarding, you’ll often have to distribute your weight on both the front and rear.

Doing this while skateboarding will result in an unpleasant experience (pebbles, cracks, Twiggs).

 Turning and Moving

Finally, I’d like to talk about pivoting.

In order to move forward on a skateboard, you must simply lean in the desired direction and apply pressure to your heels and toes.

To spin a snowboard, you must engage your entire body.

A skateboard fakey is much easier to ride than a snowboard fakey, in my opinion.

I’ve gotten quite good at skateboarding fakey, but snowboarding fakey is still a lot of work.

Costs

In comparison to skateboarding, snowboarding is far more expensive.

Your lift tickets are just as pricey as the equipment you’ll need to get down the slopes.

Additionally, the cost of alcohol consumption and lodging during a trip can significantly raise the overall cost.

A whole skateboard will set you back approximately $150, while a pair of shoes would set you back about $50.

A snowboard can easily cost two or three times as much, or even more, depending on the brand and quality.

I have found a great skateboard for beginners for about $80 that I thought you might be interested in seeing.

Snowboarding vs Skateboarding, Which Is Easier?

I’m not able to speak for everyone in this room.

Snowboarding and skateboarding are two of the most popular sports in the United States.

Snowboarding and skiing have a lot in common, although some parts of each sport are easier to learn than others.

Learning to Ride a Snowboard Is More Difficult

Skateboarding is a lot easier to learn than riding a bike because it’s just a matter of pushing and cruising.

It’s all about shifting your weight around and slightly pressing your feet when steering until you have the hang of balancing.

Riding a snowboard is a bit more difficult than riding a skateboard.

You can easily go too fast and have no idea how to slow down.

Slams are common when you’re learning how to ride a snowboard.

In spite of the fact that snow is softer than concrete, slipping on it hurts.

Skateboarding Tricks Are Harder

When it comes to skateboarding stunts, the difficulty level is substantially higher.

Even though I’ve never been able to ollie a 360 on a skateboard, I managed it in my first week of snowboarding.

It’s more harder since landing a trick requires a lot of focus and concentration on your part.

Tricks often fail because of people’s fear of failure.

Skateboarding, for example, makes it far more difficult to perform a boardslide.

On a snowboard, it’s easier to perform a boardslide because you just need a tiny jump and a broader sliding area.

Snowboarding makes it much easier to perform jumps.

So I’d say it’s a little of both.

It will be easier for you to learn how to skateboard, but the stunts will be more difficult.

Even if snowboarding is more difficult, the moves are more accessible to beginners.

Skateboarders and snowboarders both agree that when things go wrong, skating is more painful than either one of the other sports.

Landing on snow would be preferable to slamming into concrete.

Seemore: skateboard for 5 year olds kid

Consider a Snowskate

Snowboarding and skateboarding are the parents of what?

I have a snowskate for you!

For those who can’t settle on one, you may want to bring this hybrid along.

Skateboarding-style games are a lot of fun, however removing the trucks from the skateboard will not function.

Snow skates aren’t technically new, but you’re seeing more of them lately.

Similar in size and shape, but with several notable variances, a snowskate’s deck is different from a standard skateboard.

There are four different sorts, but a single deck snow skate is what you want.

Two or three tiers of wood are used to construct it.

Solid plastic is used for the bottom, which has 5 to 7 grooves carved into it for added traction.

A unique plastic grip (similar to anti-slip) covers the top of the board in snowskates, and some even feature rust-resistant steel studs set in long-wearing polyurea.

Increased traction between your feet and the board can be achieved by using this method.

Compared to skating or snowboarding, this is a completely unique sensation.

Try something new if you want to.

If I Can Snowboard Can I Skateboard?

Snowboarders, like skateboarders, despise the heat of the summer (except for those who do both).

In the off-season, if you’re interested in learning to skateboard instead of snowboarding, go for it!

If you already know how to snowboard, it’s definitely easier to learn how to skateboard.

You’re able to jump off since your feet are closer together.

As for the more advanced topics, you may have a difficult time grasping them.

It’s quite another thing to do an ollie on a skateboard than it is a snowboard.

Even if you are familiar with how a board behaves when you slide, boardslides should be simpler.

Skateboarding instruction is similar to that of snowboarding in that it begins with fundamentals and progresses to more advanced techniques.

Don’t do anything you’re not comfortable with at first.

Beginner stunts can be practiced once you feel comfortable on the bike.

I’ve put up a list of beginner-friendly tips that you can learn in a matter of minutes.

The kind of stuff that still looks good, but isn’t complicated, like ollies and kickflips.

Why not Both?

Skateboarding and snowboarding are two of the best sports to enjoy with a group of people.

While having fun, you’ll burn a lot of calories, which is good for your health and your waistline.

Skateboarding and snowboarding each come with their own set of dangers, so only participate to the best of your ability.

 

Choosing Woods to Build a Speaker Box

How to choosing Woods to Build a Speaker Box

 

The first step in putting together a sound system is to build a speaker box.

While the speaker box design is entirely up to you, there are a few general principles to keep in mind

Music is one of your favorite pastimes, right?

Is there a music that brings a grin to your face every time you hear it?

If yes, then you’ll want to read this blog post!

To show you how simple it is to create your speaker box, I’m going to demonstrate.

Whether you’re adding a speaker box or replacing an old one, making your own is a more cost-effective and time-saving option.

So join me as I show you how to build a basic wood box from scraps around the house.

Pick speaker-building materials

When it comes to speakers, the size of the speaker box should be determined by the type of speaker

There should be more room inside for them to move about if they’re larger.

Smaller speakers require less room.

Consider density and durability, grain orientation and strength/flexibility, coloring, and weight when selecting wood for construction.

Because each cut must be precisely aligned with the previous one, tapered cuts are more time consuming than straight cuts.

When constructing a speaker box, wood is a critical component to take into account.

The wood used in the construction of a speaker box should be selected with care and in compliance with the sound quality standards.

In the long run, a bad choice of wood might lead to costly repairs, which no one wants to deal with at all.

The discussion on speaker box wood selection has raised some excellent points.

If you don’t do your homework, you could end up spending more money than required or not getting the outcomes you want.

Wood for speaker enclosure

It’s critical to be familiar with the advantages and disadvantages of the many varieties of wood that can be used for speaker boxes.

Plywood: Because of its tendency to split, this material can be challenging to deal with.

Also, because plywood does not resonance well, sound exits rapidly and is difficult to travel at low frequencies (bass).

Although it doesn’t have the same resonant qualities as plywood, MDF nonetheless resonates better than particle board or chipboard.

Glue isn’t necessary when putting together MDF parts; screws will do the job just fine.

Particle Board: This wood has a low resonant frequency, making it ideal for applications where weight is a concern.

The outside shell of the speaker enclosure, as well as some internal bracing, will also require cardboard boxes (for example, egg cartons).

If you are using wooden planks, cut them into manageable 3-foot lengths at a 2 inch width.

It’s also important that the wood be dry, as wet wood doesn’t adhere well to glue.